Your RC Helicopter Get Troubleshoot?
Friday, January 8, 2010
If you get troubleshoot with your rc helicopter, just don't panic at first. Just try not to panic just bring the RC helicopter down slowly. If Bringing the RC helicopter fast, this just will make controlling your rc helicopter more harder.
Simply keep try to stay calm while slowly lowering your RC helicopter down to the ground. Once it is on the ground be sure to inspect it thoroughly. When the RC helicopters starts to act strange you should take the RC helicopter down and inspect every part of the RC helicopter. Look over the way the parts were installed and see if you did the proper installation.
Try to work from the tail rotor all the way to the canopy of the rc helicopter. There could be potential problems that you will not know about until it is too late. This might seem like an inconvenience but it's better than crashing and paying money for a crash the rc helicopter that could have been avoided. When the radio and receiver are turned on, that's when you are supposed to notice anything different with your rc helicopter. Hear for noises that come from the servos of the rc helicopter.
Are they working properly?
If the servo inspection goes well, while securely holding the main rotor, turn on rc helicopters engine and hear how the engine sounds.
Does the engine sound normal?
This is the simple tips: As you fly more and more you will know how the engine is supposed tosound to you. Just remember that if at any time the RC helicopter acts funny put that rc helicopter down and run the trouble shooting technique.
Try to work from the tail rotor all the way to the canopy of the rc helicopter. There could be potential problems that you will not know about until it is too late. This might seem like an inconvenience but it's better than crashing and paying money for a crash the rc helicopter that could have been avoided. When the radio and receiver are turned on, that's when you are supposed to notice anything different with your rc helicopter. Hear for noises that come from the servos of the rc helicopter.
Are they working properly?
If the servo inspection goes well, while securely holding the main rotor, turn on rc helicopters engine and hear how the engine sounds.
Does the engine sound normal?
This is the simple tips: As you fly more and more you will know how the engine is supposed tosound to you. Just remember that if at any time the RC helicopter acts funny put that rc helicopter down and run the trouble shooting technique.
Labels: rc helicopters
at 11:04 AM
Post a Comment