BNF RC Airplanes and RC Helicopters
Tuesday, December 15, 2009
BNF mean Bind and Fly. This is available for rc airplanes and rc helicopters. There are many BNF rc model now, there are bnf rc airplanes and bnf rc helicopter. Some people said that BNF rc planes model actually is a natural evolution of PNP rc planes model. Here are some next explanations about BNF rc airplanes and rc helicopters
If you buy BNF rc planes model, you will get a 2.4GHz DSM2 technology compatible receiver, notably from the Spektrum range, and a battery pack. I think you maybe think that the BNF rc planes model is just like RTF rc planes model too(try big rc planes?)?...This is maybe the reliable answer: a BNF rc planes model is closer to an RTF rc model one in terms of what you get in the box, you actually still need a DSM2 compatible transmitter to complete it.
I think this is the most important news, we know that a 2.4 transmitters are increasingly popular and more widely used, it is logical that more people are being attracted to aircraft BNF. Like a typical RC RTF model, there is plenty to do for the other model that some final assembly work and very link the receiver to your own transmitter. Once this is completed, usually a few seconds later, you're ready to go.
The transmitter receptor binding is a critical part of flying in a 2.4GHz system, and allows the RX and TX to lock together to form impenetrable signal systems has made the spread spectrum radio reliably.
The bonding process should be conducted as directed by your Tx, but basically involves inserting the bind plug supply (right) into the proper slot and the receiver can be changed while the Tx is enabled of binding. On my Spektrum DX6i transmitter, for example, this means holding down the 'switch Trainer' while turning on the Tx.
Turn the receiver Rx and Tx and then communicate with each other and unite after a few seconds, the success of union is indicated by the LED blinks orange light going on to a solid. Once bound, should not have to do it again for that model.
I think this is the most important news, we know that a 2.4 transmitters are increasingly popular and more widely used, it is logical that more people are being attracted to aircraft BNF. Like a typical RC RTF model, there is plenty to do for the other model that some final assembly work and very link the receiver to your own transmitter. Once this is completed, usually a few seconds later, you're ready to go.
The transmitter receptor binding is a critical part of flying in a 2.4GHz system, and allows the RX and TX to lock together to form impenetrable signal systems has made the spread spectrum radio reliably.
The bonding process should be conducted as directed by your Tx, but basically involves inserting the bind plug supply (right) into the proper slot and the receiver can be changed while the Tx is enabled of binding. On my Spektrum DX6i transmitter, for example, this means holding down the 'switch Trainer' while turning on the Tx.
Turn the receiver Rx and Tx and then communicate with each other and unite after a few seconds, the success of union is indicated by the LED blinks orange light going on to a solid. Once bound, should not have to do it again for that model.
Labels: rc airplanes, rc helicopters
at 1:06 PM
Post a Comment