E-FLY 100C Radio control complete set
Thursday, January 15, 2009
This is E-Fly 100C Radio Control, do you know that this is very cheap rc radio that we can find on the internet. It's only Rp.1.155.000,00 or about $100. I think i must recommend that you use this rc radio, look about the style..this is look a great rc airplanes radio. Maybe you would wonder how cheap the price above, but you must know that this is a kind of rc airplanes radio for general purpose, what ever your model such engine or electric rc models or even you will fly in flight model simulator, this is because it's have 6 channels, so you can control your rc helicopters or even fly your f3j,f3b,..or anything, even if you are beginner, this rc radio would be good for you if you will fly rc aerobatic or in the next advanced flying, because you need more channels to control your rc model aircraft. Check this for more complete spesifications, Specifications :
Type : E-FLY100C
Modulation :FM-PPM
Working Current : 250mA
Flying Modes : A/V/H/C
Channels : 6Channels
Signal Power : 800mW
Voltage Indicator : LCD
Work Frequency : 72MHz
Working Voltage : 9.6V Ni-ca Rechargable Battery Pack
Four Modes As Follows :
Mode A:Aeroplane
1. The ranges of CH1,CH2 and CH4 of servos can be adjusted by Tiny mix 1 in order to adjust for different aerobatics.
2. The function of CH1,CH2,CH4 small angel and large angle can be changed by switch 3
3. The mixture function of ch1 and ch6 can be achieved by switch 2.
4. There is a isolated channel for landing gear and that function can be achieved by switch 1
5. Reverse switch for CH1,CH2,CH3,CH4 and CH6
6. Lock and unlock function. When all data is set, the settings can be saved with lock function and any changes will not be accepted.
7. Alarm for low voltage: when voltage of battery is under 8.5V,the red LED will flash and when under 7.5V,LCD will blank out.
Mode V:V tail mode
1. The mixture function of ch1 and ch6 can be achieved by switch 1
2. The range of servo for CH4 can be changed by tiny mix2
3. The function of CH1,CH2,CH4 small angle and large angle can be changed by switch 3
4. There are two isolated switch channel CH5 and CH6. And collapsable landing gear as well as photo-taking can be achieved by switch channel 1 and 2
5. Reverse switch for CH1,CH2,CH3,CH4 and CH6
6. Lock and unlock function. When all data is set, the settings can be saved with lock function and any changes will not be accepted.
7. Alarm for low voltage: when voltage of battery is under 8.5V,the red LED will flash and when under 7.5V,LCD will blank out.
Mode H:Helicopter mode
1. PIT and PLT can be adjusted by tiny mix 1 and 2
2. The function of CH1,CH2,CH4 small angle and large angle can be changed by switch 3
3. There is a switch for the function of Gyro and can be switched between normal mode and head lock mode by switch 1
4. The switch 2 is settled for 3D diverted flight
5. Reverse switch for CH1,CH2,CH3,CH4 and CH6
6. Lock and unlock function. When all data is set, the settings can be saved with lock function and any changes will be not accepted.
7. Alarm for low voltage: when voltage of battery is under 8.5V,the red LED will flash and when under 7.5V,LCD will blank out.
Mode C:CCPM helicopter mode
1. The mixture function of CH1,CH2,CH3 and CH6 can by achieved for CCPM helicopter.PIT and PLT can be adjusted by tiny mix 1 and 2
2. The function of CH1,CH2,CH4 small angle and large angle can be changed by switch 3
3. There is a switch for the function of Gyro and can be switched between normal mode and head lock mode by switch 1
4. The switch 2 is settled for 3D diverted flight
5. Reverse switch for CH1,CH2,CH3,CH4 and CH6v
6. Lock and unlock function. When all data is set, the settings can be saved with lock function and any changes will not be accepted.
7. Alarm for low voltage: when voltage of battery is under 8.5V,the red LED will flash and when under 7.5V,LCD will blank out.
Complete kit consists of the following :
One E-Fly 100C Transmitter.
Rechargable Ni-MH Tx Battery
Wall Charger
One 100C 6 Channel Receiver
Three 9gram Analogue Servos
One Audio Cable for PC connection - Use for Flight Sim.
One pair 72MHz Tx/Rx Crystals
One CD with FMS Software.
Buy here...
Type : E-FLY100C
Modulation :FM-PPM
Working Current : 250mA
Flying Modes : A/V/H/C
Channels : 6Channels
Signal Power : 800mW
Voltage Indicator : LCD
Work Frequency : 72MHz
Working Voltage : 9.6V Ni-ca Rechargable Battery Pack
Four Modes As Follows :
Mode A:Aeroplane
1. The ranges of CH1,CH2 and CH4 of servos can be adjusted by Tiny mix 1 in order to adjust for different aerobatics.
2. The function of CH1,CH2,CH4 small angel and large angle can be changed by switch 3
3. The mixture function of ch1 and ch6 can be achieved by switch 2.
4. There is a isolated channel for landing gear and that function can be achieved by switch 1
5. Reverse switch for CH1,CH2,CH3,CH4 and CH6
6. Lock and unlock function. When all data is set, the settings can be saved with lock function and any changes will not be accepted.
7. Alarm for low voltage: when voltage of battery is under 8.5V,the red LED will flash and when under 7.5V,LCD will blank out.
Mode V:V tail mode
1. The mixture function of ch1 and ch6 can be achieved by switch 1
2. The range of servo for CH4 can be changed by tiny mix2
3. The function of CH1,CH2,CH4 small angle and large angle can be changed by switch 3
4. There are two isolated switch channel CH5 and CH6. And collapsable landing gear as well as photo-taking can be achieved by switch channel 1 and 2
5. Reverse switch for CH1,CH2,CH3,CH4 and CH6
6. Lock and unlock function. When all data is set, the settings can be saved with lock function and any changes will not be accepted.
7. Alarm for low voltage: when voltage of battery is under 8.5V,the red LED will flash and when under 7.5V,LCD will blank out.
Mode H:Helicopter mode
1. PIT and PLT can be adjusted by tiny mix 1 and 2
2. The function of CH1,CH2,CH4 small angle and large angle can be changed by switch 3
3. There is a switch for the function of Gyro and can be switched between normal mode and head lock mode by switch 1
4. The switch 2 is settled for 3D diverted flight
5. Reverse switch for CH1,CH2,CH3,CH4 and CH6
6. Lock and unlock function. When all data is set, the settings can be saved with lock function and any changes will be not accepted.
7. Alarm for low voltage: when voltage of battery is under 8.5V,the red LED will flash and when under 7.5V,LCD will blank out.
Mode C:CCPM helicopter mode
1. The mixture function of CH1,CH2,CH3 and CH6 can by achieved for CCPM helicopter.PIT and PLT can be adjusted by tiny mix 1 and 2
2. The function of CH1,CH2,CH4 small angle and large angle can be changed by switch 3
3. There is a switch for the function of Gyro and can be switched between normal mode and head lock mode by switch 1
4. The switch 2 is settled for 3D diverted flight
5. Reverse switch for CH1,CH2,CH3,CH4 and CH6v
6. Lock and unlock function. When all data is set, the settings can be saved with lock function and any changes will not be accepted.
7. Alarm for low voltage: when voltage of battery is under 8.5V,the red LED will flash and when under 7.5V,LCD will blank out.
Complete kit consists of the following :
One E-Fly 100C Transmitter.
Rechargable Ni-MH Tx Battery
Wall Charger
One 100C 6 Channel Receiver
Three 9gram Analogue Servos
One Audio Cable for PC connection - Use for Flight Sim.
One pair 72MHz Tx/Rx Crystals
One CD with FMS Software.
Buy here...
Labels: rc airplanes, rc helicopters, remote control planes
at 12:36 PM
Post a Comment